Position:Home>>Copper molybdenum
Email:ebiz@ctia.com.cn
Related Links
Copper molybdenum
Copper molybdenum
Molybdenum products are important in the missile industry, where it is used for high-temperature structural parts, such as nozzles, leading edges of control surfaces, support vanes, struts, reentry cones, heal-radiation shields, heat sinks, turbine wheels, and pumps.
Molybdenum products have also been useful in the nuclear, chemical, glass, and metallizing industries. Service temperatures, for molybdenum alloys in structural applications arc, are limited to a maximum of about 1650'C (3000'F). Pure molybdenum has good resistance to hydrochloric acid and is used for acid service in chemical process industries.
Molybdenum material are used in the following industries: glass melting, vacuum furnace, vacuum deposition, aerospace, solar,nuclear, electronics,automotive, and medical.
We carry molybdenum in wire, rod, sheet, and plate. We also sellmolybdenum nuts, bolts, heat shields, and other hardware for vacuumfurnace and high vacuum environments.
We carry molybdenum in wire, rod, sheet, and plate. We also sellmolybdenum nuts, bolts, heat shields, and other hardware for vacuumfurnace and high vacuum environments.
1, Grade: Mo85Cu15, Mo70Cu30, Mo60Cu40, Mo50Cu50
2, Length: 5mm-300mm
3, Width: 5mm-300mm
4, Thickness: 0.1mm-5.0mm
5, Semi-finished or finished (Ni/Au plated) products available
2, Length: 5mm-300mm
3, Width: 5mm-300mm
4, Thickness: 0.1mm-5.0mm
5, Semi-finished or finished (Ni/Au plated) products available
Copper molybdenum high performance composites are fabricated from carefully controlled porous Molybdenum that is vacuum infiltrated with molten copper. This results in a MoCu composite that has high conductivity and a matched low thermal expansion for heat sinks.
Composition: Mo 50%, Cu 50%
Density: 9.4g/cm3
Coefficient of Thermal Expansion (10-6/K): 9.8
Thermal Conductivity (W/mK): 245
Specific Heat Capacity (J/kgK): 320
Length: 5mm-300mm, Width: 5mm-300mm, Thickness: 0.1mm-5.0mm
Density: 9.4g/cm3
Coefficient of Thermal Expansion (10-6/K): 9.8
Thermal Conductivity (W/mK): 245
Specific Heat Capacity (J/kgK): 320
Length: 5mm-300mm, Width: 5mm-300mm, Thickness: 0.1mm-5.0mm
Composition: Mo 60%, Cu 40%
Density: 9.5g/cm3
Coefficient of Thermal Expansion (10-6/K): 8.7
Thermal Conductivity (W/mK): 215
Specific Heat Capacity (J/kgK): 310
Length: 5mm-300mm, Width: 5mm-300mm, Thickness: 0.1mm-5.0mm
Density: 9.5g/cm3
Coefficient of Thermal Expansion (10-6/K): 8.7
Thermal Conductivity (W/mK): 215
Specific Heat Capacity (J/kgK): 310
Length: 5mm-300mm, Width: 5mm-300mm, Thickness: 0.1mm-5.0mm
Composition: Mo 70%, Cu 30%
Density: 9.6g/cm3
Coefficient of Thermal Expansion (10-6/K): 7.5
Thermal Conductivity (W/mK): 190
Specific Heat Capacity (J/kgK): 300
Length: 5mm-300mm, Width: 5mm-300mm, Thickness: 0.1mm-5.0mm
Density: 9.6g/cm3
Coefficient of Thermal Expansion (10-6/K): 7.5
Thermal Conductivity (W/mK): 190
Specific Heat Capacity (J/kgK): 300
Length: 5mm-300mm, Width: 5mm-300mm, Thickness: 0.1mm-5.0mm
Composition: Mo 85%, Cu 15%
Density: 10.0g/cm3
Coefficient of Thermal Expansion (10-6/K): 6.3
Thermal Conductivity (W/mK): 160
Specific Heat Capacity (J/kgK): 275
Length: 5mm-300mm, Width: 5mm-300mm, Thickness: 0.1mm-5.0mm
Density: 10.0g/cm3
Coefficient of Thermal Expansion (10-6/K): 6.3
Thermal Conductivity (W/mK): 160
Specific Heat Capacity (J/kgK): 275
Length: 5mm-300mm, Width: 5mm-300mm, Thickness: 0.1mm-5.0mm
Cu/Mo/Cu (CMC) is a sandwich composite including a molybdenum core layer and two copper clad layers. It has tailorable CTE, high thermal conductivity and high strength. All types of Cu/Mo/Cu sheets can be stamped into components.
Cu/Mo70Cu/Cu (CPC) is a sandwich composite like Cu/Mo/Cu including a Mo70-Cu alloy core layer and two copper clad layers. The ratio of the thickness in Cu:Mo-Cu:Cu is 1:4:1. It has different CTE in X and Y direction, higher thermal conductivity than that of W(Mo)-Cu, Cu/Mo/Cu and more cheap. All types of Cu/Mo70Cu/Cu sheets can be stamped into components.