Mo60Cu40 tepelné jímky, chladiče
Mo60Cu40 varme dræn, varme dræn
Mo60Cu40 heatsinks, heat sinks
Mo60Cu40 heat sinks, heat sinks
Mo60Cu40, dissipateurs thermiques, dissipateurs thermiques
Mo60Cu40 Kühlkörper, Kühlkörper
Dissipatori di calore Mo60Cu40, dissipatori di calore
Mo60Cu40 varme vasker, kjøleelementer
Dissipadores de calor Mo60Cu40, dissipadores de calor
Chiuvete de căldură Mo60Cu40, chiuvete de căldură
Mo60Cu40 теплоотвода, теплоотводы
Receptores de calor Mo60Cu40, disipadores térmicos
Mo60Cu40 värme sänkor, värme avledning
Mo60Cu40 ısı lavabolar, ısı lavabolar
 
Copper molybdenum

Mo60Cu40 heat sinks

Mo60Cu40 heat sinks Mo60Cu40 heat sinks Mo60Cu40 heat sinks
  • Composition: Mo 60%, Cu 40%
  • Density: 9.5g/cm3
  • Coefficient of Thermal Expansion (10-6/K): 8.7
  • Thermal Conductivity (W/mK): 215
  • Specific Heat Capacity (J/kgK): 310
  • Length: 5mm-300mm
  • Width: 5mm-300mm
  • Thickness: 0.1mm-5.0mm

Molybdenum Copper high performance composites are fabricated from carefully controlled porous Molybdenum that is vacuum infiltrated with molten copper. This results in a MoCu composite that has high conductivity and a matched low thermal expansion for heat sinks.

Molybdenum copper composites to be used extensively in thermal mounting plates, chip carriers, flanges, and frames for high-powered electronic devices. With the thermal advantages of copper with the very low expansion characteristics of molybdenum, molybdenum copper has properties similar to those of silicone carbide, aluminum oxide, and beryllium oxide. The thermal conductivity and low expansion also make molybdenum copper alloy an excellent choice even for extremely dense circuits.

It is a composite of molybdenum and copper. By controlling the content of molybdenum, we can design its coefficient of thermal expansion (CTE), matching that of the materials, such as Ceramics (Al2O3, BeO), Semiconductors (Si), Kovar, etc.

Advantages: High thermal conductivity, Excellent hermetic, Excellent size control, surface finish and flatness, Semi-finished or finished (Ni/Au plated) products available

The data of copper molybdenum sheet

Ingredients Name

CAS Number

% Weight

Molybdenum 7439-98-7 50-85
Copper 7440-50-8 15-50

 

Composition
(Wt%)

Mo 85%
Cu 15%

Mo 70%
Cu 30%

Mo 50%
Cu 50%

Density
(g/cm3)
10.0 9.6 9.5
Coefficient of Thermal Expansion
(10-6/K)
6.3 7.5 9.8
Thermal Conductivity
(W/mK)
160 190 245
Specific Heat Capacity
(J/kgK)
275 300 320
Young’s Modulus
(Gpa)
275 220 170
Specific Electrical Resistance
(uΩm)
0.044 0.035 0.027
Vickers Hardness
(HV10)
235 175 145
 

Related Links

Copper Tungsten Heat Sinks
Copper Molybdenum Heat Sinks
Property Data Sheet of Molybdenum Copper Heat Sinks (PDF)
Property Data Sheet of Copper Tungsten Heat Sinks (PDF)

Language: | český | danske | Nederlands | English | française | Deutsch | italiano | norske | português | român | русский | español | Švédsky | Türk
Email : ebiz@ctia.com.cn  
Copyright©2001 - 2011 CTIA E-biz Center All Rights Reserved